Supplemental Trace Minerals (Zn, Cu, and Mn) as Sulfates or Hydroxy Trace Mineral Sources for Beef Heifers

Crossbred heifers (n = 286, 255 ± 4.5 kg initial BW, 295 ± 16.5 d of age) were used over a 2-yr period to determine the effects of mineral source on beef heifer development at 2 locations (n = 71 and n = 72, Fayetteville, blocks 1 and 4; n = 72 in each of 2 breeding groups, Batesville, blocks 2 and 3). Heifers were stratified based on initial BW, age, health, prior research projects, and sire, and then assigned to 6 groups of 12 heifers, that were assigned randomly to 1 of 2 trace mineral treatments. The 2 treatments were trace mineral supplementation (Cu [74 mg/d], Mn [294 mg/d], and Zn [221 mg/d]) as 1) sulfate or 2) hydroxychloride sources. Treatments were delivered through mineral and vitamin supplements provided free choice and formulated for a consumption rate of 113 g/d. Treatments began on d 0, and the breeding season began on d 112 and d 105 (blocks 1 and 4 respectively). After a synchronization period and a 10 d eligible period for artificial insemination, heifers were exposed to bulls for 50 d. At d 130 (block 2) and d 146 (block 3) heifers were exposed to bulls for 60 d. The trail concluded on d 224 (block 1), d 227 (block 4), d 252 (block 2), and d 268 (block 3). During the trial, BW at 28-d intervals, mineral disappearance, health records, and reproductive efficiency data were recorded. At the end of each trial, pregnancy was confirmed by the presence of Pregnancy-Specific Protein B concentrations in blood. No treatment differences (P ≥ 0.52) were detected in BW or ADG. There was no significance for greater mineral disappearance between mineral sulfate and hydroxychloride treatments (P = 0.46) There were no differences in the percentage of heifers treated for bovine respiratory disease (P = 0.77) or foot rot occurrence (P = 0.57) between sulfate and hydroxychloride treatments. Trace mineral source did not affect overall pregnancy rates (P = 0.85). Therefore, supplementing either a sulfate or hydroxychloride source of Zn, Cu, and Mn to developing beef heifers resulted in similar performance

M–M Bond-Stretching Energy Landscapes for M_2(dimen)_(4)^(2+) (M = Rh, Ir; dimen = 1,8-Diisocyanomenthane) Complexes

Isomers of Ir_2(dimen)_(4)^(2+) (dimen = 1,8-diisocyanomenthane) exhibit different Ir–Ir bond distances in a 2:1 MTHF/EtCN solution (MTHF = 2-methyltetrahydrofuran). Variable-temperature absorption data suggest that the isomer with the shorter Ir–Ir distance is favored at room temperature [K = ~8; ΔH° = −0.8 kcal/mol; ΔS° = 1.44 cal mol^(–1) K^(–1)]. We report calculations that shed light on M_2(dimen)_(4)^(2+) (M = Rh, Ir) structural differences: (1) metal–metal interaction favors short distances; (2) ligand deformational-strain energy favors long distances; (3) out-of-plane (A_(2u)) distortion promotes twisting of the ligand backbone at short metal–metal separations. Calculated potential-energy surfaces reveal a double minimum for Ir_2(dimen)_(4)^(2+) (4.1 Å Ir–Ir with 0° twist angle and ~3.6 Å Ir–Ir with ±12° twist angle) but not for the rhodium analogue (4.5 Å Rh–Rh with no twisting). Because both the ligand strain and A_(2u) distortional energy are virtually identical for the two complexes, the strength of the metal–metal interaction is the determining factor. On the basis of the magnitude of this interaction, we obtain the following results: (1) a single-minimum (along the Ir–Ir coordinate), harmonic potential-energy surface for the triplet electronic excited state of Ir_2(dimen)_(4)^(2+) (R_(e,Ir–Ir) = 2.87 Å; F_(Ir–Ir) = 0.99 mdyn Å^(–1)); (2) a single-minimum, anharmonic surface for the ground state of Rh_2(dimen)_(4)^(2+) (R_(e,Rh–Rh) = 3.23 Å; F_(Rh–Rh) = 0.09 mdyn Å^(–1)); (3) a double-minimum (along the Ir–Ir coordinate) surface for the ground state of Ir_2(dimen)_(4)^(2+) (R_(e,Ir–Ir) = 3.23 Å; F_(Ir–Ir) = 0.16 mdyn Å^(–1))

Striatal neuroinflammation promotes parkinsonism in rats

The specific role of neuroinflammation in the pathogenesis of Parkinson's disease remains to be fully elucidated. By infusing lipopolysaccharide (LPS) into the striatum, we investigated the effect of neuroinflammation on the dopamine nigrostriatal pathway. Here, we report that LPS-induced neuroinflammation in the striatum causes progressive degeneration of the dopamine nigrostriatal system, which is accompanied by motor impairments resembling parkinsonism. Our results indicate that neurodegeneration is associated with defects in the mitochondrial respiratory chain related to extensive S-nitrosylation/nitration of mitochondrial proteins. Mitochondrial injury was prevented by treatment of L-N^6^-(l-iminoethyl)-lysine, an inducible nitric oxide synthase (iNOS) inhibitor, suggesting that iNOS-derived NO is responsible for mitochondrial dysfunction. Furthermore, the nigral dopamine neurons exhibited intracytoplasmic [alpha]-synuclein and ubiquitin accumulation. These results demonstrate that degeneration of nigral dopamine neurons by neuroinflammation is associated with mitochondrial malfunction induced by NO-mediated S-nitrosylation/nitration of mitochondrial proteins

Country-Code Top-Level Domain Best Current Practices Info

11 pagesThis document describes the issues and best current practices for the technical organization, operation, and management of country-code top-level domains (ccTLDs)

When Eyewitnesses Are Also Earwitnesses: Effects on Visual and Voice Identifications

In Experiment 1, subjects witnessed a mock crime either visually or both auditorily and visually. A visual lineup was conducted with either a guilty or an innocent suspect present. Identification accuracy of visual-only versus auditory-visual witnessed did not differ, although the diagnosticity ratio for the visual-only condition was more than twice as large. Thus, there was only limited support for auditory information interfering with encoding visual information. In Experiment 2, subjects witnessed a mock crime either auditorily or both auditorily and visually. A voice lineup was conducted with either a guilty or an innocent suspect present. Consistent with Yarmey’s (1986) prediction that visual information can interfere with encoding auditory information, guilty-suspect identification was significantly higher in the auditory-only condition

Cyclooxygenase-2 mediates microglial activation and secondary dopaminergic cell death in the mouse MPTP model of Parkinson's disease

BACKGROUND: Accumulating evidence suggests that inflammation plays an important role in the progression of Parkinson's disease (PD). Among many inflammatory factors found in the PD brain, cyclooxygenase (COX), specifically the inducible isoform, COX-2, is believed to be a critical enzyme in the inflammatory response. Induction of COX-2 is also found in an experimental model of PD produced by administration of 1-methy-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP). METHOD: COX-2-deficient mice or C57BL/6 mice were treated with MPTP to investigate the effects of COX-2 deficiency or by using various doses of valdecoxib, a specific COX-2 inhibitor, which induces inhibition of COX-2 on dopaminergic neuronal toxicity and locomotor activity impairment. Immunohistochemistry, stereological cell counts, immunoblotting, an automated spontaneous locomotor activity recorder and rotarod behavioral testing apparatus were used to assess microglial activation, cell loss, and behavioral impariments. RESULTS: MPTP reduced tyrosine hydroxylase (TH)-positive cell counts in the substantia nigra pars compacta (SNpc); total distance traveled, vertical activity, and coordination on a rotarod; and increased microglia activation. Valdecoxib alleviated the microglial activation, the loss of TH-positive cells and the decrease in open field and vertical activity. COX-2 deficiency attenuated MPTP-induced microglial activation, degeneration of TH-positive cells, and loss of coordination. CONCLUSION: These results indicate that reducing COX-2 activity can mitigate the secondary and progressive loss of dopaminergic neurons as well as the motor deficits induced by MPTP, possibly by suppression of microglial activation in the SNpc

Synthesis Methods, Microscopy Characterization and Device Integration of Nanoscale Metal Oxide Semiconductors for Gas Sensing

A comparison is made between SnO2, ZnO, and TiO2 single-crystal nanowires and SnO2 polycrystalline nanofibers for gas sensing. Both nanostructures possess a one-dimensional morphology. Different synthesis methods are used to produce these materials: thermal evaporation-condensation (TEC), controlled oxidation, and electrospinning. Advantages and limitations of each technique are listed. Practical issues associated with harvesting, purification, and integration of these materials into sensing devices are detailed. For comparison to the nascent form, these sensing materials are surface coated with Pd and Pt nanoparticles. Gas sensing tests, with respect to H2, are conducted at ambient and elevated temperatures. Comparative normalized responses and time constants for the catalyst and noncatalyst systems provide a basis for identification of the superior metal-oxide nanostructure and catalyst combination. With temperature-dependent data, Arrhenius analyses are made to determine activation energies for the catalyst-assisted systems

Nanoscale Metal Oxide Semiconductors for Gas Sensing

A report describes the fabrication and testing of nanoscale metal oxide semiconductors (MOSs) for gas and chemical sensing. This document examines the relationship between processing approaches and resulting sensor behavior. This is a core question related to a range of applications of nanotechnology and a number of different synthesis methods are discussed: thermal evaporation- condensation (TEC), controlled oxidation, and electrospinning. Advantages and limitations of each technique are listed, providing a processing overview to developers of nanotechnology- based systems. The results of a significant amount of testing and comparison are also described. A comparison is made between SnO2, ZnO, and TiO2 single-crystal nanowires and SnO2 polycrystalline nanofibers for gas sensing. The TECsynthesized single-crystal nanowires offer uniform crystal surfaces, resistance to sintering, and their synthesis may be done apart from the substrate. The TECproduced nanowire response is very low, even at the operating temperature of 200 C. In contrast, the electrospun polycrystalline nanofiber response is high, suggesting that junction potentials are superior to a continuous surface depletion layer as a transduction mechanism for chemisorption. Using a catalyst deposited upon the surface in the form of nanoparticles yields dramatic gains in sensitivity for both nanostructured, one-dimensional forms. For the nanowire materials, the response magnitude and response rate uniformly increase with increasing operating temperature. Such changes are interpreted in terms of accelerated surface diffusional processes, yielding greater access to chemisorbed oxygen species and faster dissociative chemisorption, respectively. Regardless of operating temperature, sensitivity of the nanofibers is a factor of 10 to 100 greater than that of nanowires with the same catalyst for the same test condition. In summary, nanostructure appears critical to governing the reactivity, as measured by electrical resistance of these SnO2 nanomaterials towards reducing gases. With regard to the sensitivity of the different nascent nanostructures, the electrospun nanofibers appear preferabl

Chemical Sensors Based on Metal Oxide Nanostructures

This paper is an overview of sensor development based on metal oxide nanostructures. While nanostructures such as nanorods show significan t potential as enabling materials for chemical sensors, a number of s ignificant technical challenges remain. The major issues addressed in this work revolve around the ability to make workable sensors. This paper discusses efforts to address three technical barriers related t o the application of nanostructures into sensor systems: 1) Improving contact of the nanostructured materials with electrodes in a microse nsor structure; 2) Controling nanostructure crystallinity to allow co ntrol of the detection mechanism; and 3) Widening the range of gases that can be detected by using different nanostructured materials. It is concluded that while this work demonstrates useful tools for furt her development, these are just the beginning steps towards realizati on of repeatable, controlled sensor systems using oxide based nanostr uctures

The Application of Metal Oxide Nanomaterials for Chemical Sensor Development

NASA Glenn Research Center (GRC) has been developing miniature chemical sensors for a variety of applications including fire detection, emissions monitoring, fuel leak detection, and environmental monitoring. Smart Lick and Stick sensor technology which integrates a sensor array, electronics, telemetry, and power into one microsystem are being developed. These microsystems require low power consumption for long-term aerospace applications. One approach to decreasing power consumption is the use of nanotechnology. Nanocrystalline tin oxide (SnO2) carbon monoxide (CO) sensors developed previously by this group have been successfully used for fire detection and emissions monitoring. This presentation will briefly review the overall NASA GRC chemical sensor program and discuss our further effort in nanotechnology applications. New carbon dioxide (CO2) sensing material using doped nanocrystalline SnO2 will be discussed. Nanocrystalline SnO2 coated solid electrolyte CO2 sensors and SnO2 nanorod and nanofiber hydrogen (H2) sensors operated at reduced or room temperatures will also be discussed